Metmo Driver Construction

The following video guides will walk you through how to change out the handle and the stainless steel barrel. 

To change the Driver Handle:

Tools you will need for this, are:
One 2.5mm or a 5/64" Allan key or hex wrench.

To change the Stainless steel barrel:

Tools you will need for this, are:
- One 2.5mm or a 5/64" Allan key or hex wrench.
- T25 drive bit. 
- Tweezers (optional)

 

If you have any problems, check out the community forum here we have a section dedicated to these mods and a dedicated following of fellow metmoers to help. or feel free to reach out to us at hello@metmocube.com, we would be happy to help