Multi Drive Expansion Kit

So, what can you fit inside the beast?

• 4mm bits: 36
• Drill bits: 10
• Files: 7
• Blade Mount (with blade attached): 1
• 4mm Adaptor: 1
• Blades: 20+
• Scribes: 3
• Leads: 5
• Full size Multi Drive handles: 2
• Stubster Multi Drive handles: 1
• Metal case: 1 

This bad boy also has three universal pockets, one of which doubles as a mount for the Metal Case. If the metal case is installed, then you still have two pockets to treat as your personal TARDIS for any extra bits or notes you might have! If used with the Metal Case, the total bit storage is increased to 60 bits. 

Each area has been tailor made for the tools of Multi Drive and the universal pockets are perfect for storing extras like the smaller Leather Case, with plenty of room for your own additions too. 

If you don’t have the Metal Case, this pocket can also be used to house a notepad or hold pens, pencils and tweezers.   

A specially designed pocket to hold the blade attachment without cutting its way through the case, with a handy pocket directly behind it for storing an assortment of blade packets.

Carrying over our innovation from the original Leather Case, you can safely store five 3mm leads in the brass tubes, keeping them safe and preventing breakages of that fragile lead while on the move.

There is ample storage for a full range of 4mm bits, so you can store all of your favourites and have them on hand with no compromises.

All put together with indestructible brass fittings, these tried and tested fittings have been used since Roman times. The simplicity and lack of moving parts make them the most rugged and simple fixing, proven to us time and time again to keep working indefinitely, unlike studs or buttons.

These are supplied with every Expansion Kit to give you a little extra utility and are also available separately as a stand alone add-on.

We were fed up of using those plastic covered wire drive shafts, where you have to have fingers of steel to hold it in place while working on an M2 screw... Many a screw has been catapulted into oblivion with one of those. So, we've created a magnetic bit holder built into a stainless steel universal joint which is perfect for reaching in, around, and getting to screws previously untouchable.  

This attachment lets you use Multi Drive with any drill bit and is supplied with a standard micro twist chuck (the black component). It can clamp a drill bit of any size up to 3.5mm, so if you have your own existing set of pin drills or want to source your own drill bits then you totally can, knowing you can get any specialist size you need, turning Multi Drive into a highly versatile pin drill.